Patch Cord CAT6 30CM
CORNET Category 6 patch cord 30cm
Is constructed of UTP 24 AWG stranded copper cable and a modular plug at each end. Patch cords are used in all work area outlets and patch panels. Patch cords are wired to be compatible with both T568A and T568B wiring schemes
APPLICATION
•10BASE-T, 100BASE-T Fast Ethernet, 1000BASE-T
•100VG-ANYLAN (IEEE802.12)
•500MHz Broadband Video
•Voice,T1, ISDN
•155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM
•Token Ring 4/16
•Power Over Ethernet (POE)
•100% factory tested to component level performance as per ANSI/TIA-568.2-D:2018 specifications
| Technical Specification | |
| Cable Construction | Bare Copper 24AWG 2X4P 7/0.18 |
| Insulation Material | HDPE |
| Jacket Material | PVC/LSZH |
| FCC compliance | Complies with ANSI/TIA-1096-A contacts plated with 50 microinches of gold |
| IEC compliance | Meets IEC 60603-7 |
| PoE compliance | Supports IEEE 802.3af/802.3at and 802.3bt type 3 and type 4 PoE application |
| Insulation Resistance | 35M Ohm |
| Cycles | 1250 times |
| Heat Resistance | 60℃ |
| Color | Grey, Yellow, Red, Blue |
| Length | 0.3M |
| Part NO |
CN-PC6UGRY-30 CN-PC6URED-30 CN-PC6UBLU-30 CN-PC6UYEL-30 |
